Carpet Cleaning Machine Assembly / Repair

17" Commercial Breeze Fork Assembly

When you open the box you wil find the machine and handle separate. Set the machine up and remove the bolts from the fork bearings. (see image #1) Set handle up on the machine, put washer on the bolt, and then insert the bolt through the fork and bearing. Put waher and then a nut on inside (see image #2) and tighten VERY tight. NOTE: The tightness of the bolt does not effect the raising and lowering of the handle as the fork pivots on the bearings themselves.

 

 

image 1
image 2
image 3