How To Tile and Grout

When cleaning grout first make sure you sweep the area clean, then you can prespray your cleaner.
We have used several different chemicals to clean grout and tile with:
Abstraction TLC is what we most often use. It does take a bit of dwell time, however whatever chemical you use this type of cleaning requires a few minutes dwell time.

Spray Abstraction TLC, or Clean-N-Vac PBX on the grout and tile, let dwell.
Start up the Conqueror with the grout and tile brush on and clean slowly side to side, you will find that if you move slowly the results will be better and the time quicker.



Take care to scrub slowly and let the machine do the work, a slow movement will allow the bristles of the grout and tile brush to PICK the grout clean.

After you have cleaned the area simply put your pad driver back on and use dry pads to mop up what you have brought up from the grout and tile.

When all is mopped up, put on a damp pad and clean any residue off the tile.
Lastly go over the tile with a red scrubber pad to put a shine and nice finish back on the tile.

Yes it is that simple!